Loop antenna

From Wiki @ Karl Jones dot com
Revision as of 14:16, 19 February 2016 by Karl Jones (Talk | contribs) (Amateur radio)

Jump to: navigation, search

A loop antenna is a radio antenna consisting of a loop (or loops) of wire, tubing, or other electrical conductor with its ends connected to a balanced transmission line (or a balun).

Description

Within this physical description there are two very distinct antenna designs:

  • The small loop (or magnetic loop) with a size much smaller than a wavelength
  • The much larger resonant loop antenna with a circumference close to the intended wavelength of operation

Small loops

Small loops have a poor efficiency and are mainly used as receiving antennas at low frequencies. Except for car radios, almost every AM broadcast receiver sold has such an antenna built inside it or directly attached to it.

Small loop antennas are also used for radio direction finding.

Resonant loop antennas

Resonant loop antennas are relatively large, governed by the intended wavelength of operation.

Thus they are typically used at higher frequencies, especially VHF and UHF, where their size is manageable.

They can be viewed as a folded dipole deformed into a different shape, and have rather similar characteristics such as a high radiation efficiency.

Amateur radio

In amateur radio, loop antennas are often used for low profile operating where larger antennas would be inconvenient, unsightly, or banned.

Loop antennas are relatively easy to build.

See also

External links