Difference between revisions of "Analog signal"
Karl Jones (Talk | contribs) (→External links) |
Karl Jones (Talk | contribs) (→External links) |
||
| Line 49: | Line 49: | ||
[[Category:Information]] | [[Category:Information]] | ||
[[Category:Physics]] | [[Category:Physics]] | ||
| + | [[Category:Telecommunications]] | ||
Revision as of 17:24, 20 April 2016
An analog or analogue signal is any continuous signal for which the time varying feature (variable) of the signal is a representation of some other time varying quantity, i.e., analogous to another time varying signal.
Contents
Description
For example, in an analog audio signal, the instantaneous voltage of the signal varies continuously with the pressure of the sound waves.
The term analog signal usually refers to electrical signals; however, mechanical, pneumatic, hydraulic, human speech, and other systems may also convey or be considered analog signals.
Property of the medium
An analog signal uses some property of the medium to convey the signal's information. For example, an aneroid barometer uses rotary position as the signal to convey pressure information. In an electrical signal, the voltage, current, or frequency of the signal may be varied to represent the information.
Information conveyed
Any information may be conveyed by an analog signal; often such a signal is a measured response to changes in physical phenomena, such as sound, light, temperature, position, or pressure. The physical variable is converted to an analog signal by a transducer. For example, in sound recording, fluctuations in air pressure (that is to say, sound) strike the diaphragm of a microphone which induces corresponding fluctuations in the current produced by a coil in an electromagnetic microphone, or the voltage produced by a condensor microphone. The voltage or the current is said to be an "analog" of the sound.
Resolution
An analog signal has a theoretically infinite resolution.
In practice an analog signal is subject to electronic noise and distortion introduced by communication channels and signal processing operations, which can progressively degrade the signal-to-noise ratio (SNR).
In contrast, digital signals have a finite resolution.
Converting an analog signal to digital form introduces a constant low-level noise called quantization noise into the signal which determines the noise floor, but once in digital form the signal can in general be processed or transmitted without introducing additional noise or distortion.
Therefore, as analog signal processing systems become more complex, they may ultimately degrade signal resolution to such an extent that their performance is surpassed by digital systems.
This explains the widespread use of digital signals in preference to analog in modern technology.
In analog systems, it is difficult to detect when such degradation occurs. However, in digital systems, degradation can not only be detected but corrected as well.
Digital signals
Continuous signals are represented on a computer using digital signals.
Digital signal use discrete functions, which can only take on one of a finite number of values.
See also
External links
- Analog signal @ Wikipedia
